Description
Laser Heat Transfer Paper for non-Fabric Hard Surface Transfer Printing
Products Description:
Product: Light Color Laser Transfer Paper
Description: with color laser copier printers, color Laser Printers, make personalizing T-shirts.
Sizes Availability: A (8.5”X11”) – 20 Sheets, B (11”X17”)- 20 Sheets,
A4 (210mm X 297mm)-20 Sheets, A3 (297mm X 420mm)- 20Sheets, 42cm’X30M rolls
1.Application
This product is recommended with most color laser copier printers, color Laser Printers for T-shirts, aprons, gift bags, mouse pads, photographs on quilts etc.
2.Advantage
◆For many varieties,small quantity of production.
◆technology is simple, don’t need plate making, direct printing, the process short , saves time and effort
◆Designed for vivid results on white or light-colored cotton or cotton/polyester blend fabrics
◆Ideal for personalizing T-shirts, canvas bags, wool garment, aprons, gift bags, mouse pads, photographs on quilts etc.
◆Transfer peels off easily with hot (matte finish) or after cooling (glossy finish)
◆Iron on with a regular household iron & Heat Transfer Press machines
◆keeping the color and washes well, keep to washing of professional standards of textiles
3.Compatibility for Light Color Laser Transfer Paper
Dedicated product for older design copier/printers such as Canon CLC 700/800/900/1100, Xerox 5700, Minolta CF900, etc. Fuses in plain paper mode. Lightweight base moulds significantly better to uneven surfaces.
4. Application Instruction
5. Iron-on Transfer processing
A. Prepare a stable, heat-resistant surface suitable for ironing on.
B. Preheat the household iron to the cotton setting.
C. Briefly iron the fabric to ensure that it is completely smooth,
D. Peel off the top layer of transfer paper onto fabric with the printed image facing upwards.
E. place the grease proof release paper onto it.
F. Do not use the steam function.Make sure that the heat is evenly transferred over the entire area. Iron the transfer paper, applying normal pressure.When moving the iron, less pressure should be given.Don’t forget the corners and edges.
G. Continue ironing until you have completely traced the sides of the image. This entire process should take about 60-70 seconds for an 8″x 10″ image surface. Follow-up by ironing the whole image quickly, heating all of the transfer paper again for approximately 10-13 seconds.
H. Peel the release paper starting at the corner after the ironing process.
6. Heat press machine Transfer processing.
a. Set heat press machine at 165°C, for 25 second using moderate pressure.
b. Briefly heat the fabric for 5 second to ensure that it is completely smooth.
c. Before transferring, cut out the motif without leaving a margin around the edges.
d. peel off the top layer of transfer paper from the paper back with adhesive polyester film.
e. Place top layer of transfer paper onto fabric with the printed image facing upwards.
f. place the cotton fabric onto it.
g. heat press machine at 165°C, for 25 second.
h. Peel the adhesive polyester film starting at the corner.
7. Washing Instructions
Wash inside out in cold water, do not use bleach,Place into the dryer or do hang to dry immediately.
8. Material Storage
conditions of 35-65% Relative Humidity and at a temperature of 10-30°C.